Epson Projector Keeps Disconnecting (7 Ways to Fix)

Are you having trouble with your Epson projector disconnecting? You’re not alone. Many users have reported issues with their Epson projectors suddenly disconnecting and it can be an incredibly frustrating experience. 

In this article, I’ll discuss 8 ways to fix the problem of an Epson projector keeps disconnecting. 

So let’s dive right into it!

How to Fix Epson Projector Keeps Disconnecting

1. Poor Connection 

A poor connection can be the cause of your Epson projector constantly disconnecting. This could be due to weak signal strength or interference from other electronics in the vicinity. 

If the signal is weak, you may need to move the projector closer to the source of the WiFi or check for any obstructions that are weakening its connection. 

Also, if there are other devices nearby that emit similar radio frequencies, these may interfere with and disrupt your projector’s connection. 

To fix the poor connection, make sure to place your projector away from any sources of radio frequency interference such as microwaves or routers.

2. Faulty Cords

Faulty cords are one of the main causes of connection problems in projectors. These cords can easily become damaged due to regular wear and tear, as well as environmental factors such as moisture, dust, heat, and cold. 

Your projector cords can become faulty if they have been exposed to heat or harsh environments for longer periods of use or even if they’ve been incorrectly stored or handled. 

Also, poor-quality cables may be prone to malfunctioning. If the connectors are not securely attached the projector will fail to detect a connection and automatically disconnect itself without warning. 

You should keep a close eye on cables and make sure they are functional. 

If you suspect that your cable may be causing the disconnection issue, then you will need to replace them right away. 

Make sure to always buy replacement cords from reliable sources and check their connections to ensure everything is secure.

3. Check the Power Source

Sometimes you can face this problem due to an interruption in the power supply. Therefore, you should check the power source.

Inspect the power cord and make sure it is properly plugged into a working electrical outlet and that the outlet is not overloaded with other devices. 

Ensure that you are using an appropriate voltage adapter for your projector, as some models require specific voltage settings for proper operation. 

If you are using a surge protector, check that it is working correctly and replace it if necessary.

4. Fix the Input Port

One of the most common reasons why an Epson projector may be disconnecting from the device faults in the ports of your Epson projector or device with which you want to connect

Therefore, you should inspect the input ports of both your Epson projector and device. 

It is possible that the input port on either the projector or device is loose or damaged. To identify whether this is the issue, unplug all cables from both devices and then plug them back in firmly. 

Make sure there are no visible signs of damage on either side and that all connections are secure before trying again.

5. Update Firmware

When your Epson projector keeps disconnecting, you should make sure that all other input devices (such as laptops, PCs, or mobile devices) have the most up-to-date firmware installed. 

Firmware updates can address compatibility issues between different devices and help ensure that all components are working together properly. 

Therefore you should update the firmware of your Epson projector and other input devices regularly. 

If you’re not sure how to check for updates, consult your device’s manufacturer or look online for instructions. 

Doing so should help resolve any connection issues you may be experiencing.

6. Factory Reset

Factory resetting an Epson projector involves resetting the device to its original factory settings. 

If you are experiencing connection problems with your Epson projector, then you should reset your projector. 

The steps for performing a factory reset on an Epson projector may vary slightly depending on the model but generally involve accessing the Setup Menu, selecting the appropriate reset option, and then confirming your action. 

Note: Make sure to back up any important data before performing a factory reset in order to avoid potential data loss. 

After the reset is complete, you can set up the projector again as if it were brand new.

7. Decrease Laptop Resolution 

Decreasing the resolution of a laptop can help resolve issues with an Epson projector disconnecting. 

This is because the lower resolution will reduce the amount of data that needs to be transferred from the laptop to the projector, allowing for a more stable connection. 

To do this, right-click on your desktop and select display settings, then adjust the resolution accordingly. If the projector still keeps disconnecting, try setting your laptop’s resolution even lower. 

You may need to experiment a bit to find the sweet spot where the connection is stable but still provides an acceptable image quality.

8. Contact Customer Support

If you are still experiencing issues with your Epson projector, such as it disconnecting or power not turning on, contact customer support. 

Epson offers free customer support and will be able to assist you in troubleshooting any issues you may have with your projector. 


Why does my Epson projector keep cutting out?

The most common cause of an Epson projector cutting out is a weak or unstable connection such as the projector being further away than the recommended distance, interference from other wireless devices in the area, or low battery levels. 

To fix this issue, try moving the projector closer to your device, ensuring no other wireless devices are nearby, and ensuring your batteries/charging source is functioning properly.

How do I stop my Epson projector from going to sleep?

To stop your Epson projector from going into sleep mode, you can adjust the projector’s power settings. 

Go to the Display Settings section of your computer and choose the “Never” option for when to turn off the display. 

This should prevent your projector from entering sleep mode.

Why is my projector blinking on and off?

Your projector may be blinking on and off if it is not receiving a stable power connection. Make sure the power cord is securely connected to your projector and the outlet. 

How many hours can an Epson projector run?

Epson projectors can typically run for up to 6,000 hours of lamp life. Depending on the model, you may get up to 7,500 hours of life from an Epson projector. 

Final Words

These are methods that will help you to resolve your Epson projector from disconnecting:

  • Poor Connection 
  • Faulty Cords
  • Check Power Source
  • Fix Input Port
  • Update Firmware
  • Factory Reset
  • Decrease Laptop Resolution 

Now I’d like to hear from you!

Which method from this article has solved your Epson projector? Do you need more solutions for your projector? 

Let me know in the comment. 


Solution when you cannot use screen mirroring